SnapTracker™ Bolt Security Seal Yellow 284-R-Y

Protect your cargo against tampering and theft.

284-R-Y

Available in different colors

Note: Stock seals must be purchased in increments/multiples of 50.

J. J. Keller's SnapTracker™ Bolt Security Seals are C-TPAT compliant and meet or exceed ISO 17712 requirements for tensile, shear, bending and impact strength.

SnapTracker™ Bolt Security Seal Yellow 284-R-Y bolt seals provide a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce. 3/8"-diameter bolt is made of ABS plastic and steel.

The SatuLock's barrel is molded in ABS Resin material to withstand impact. The seal can be installed by hand without the use of special tools. The pin is heavily chromed to prevent corrosion. A bolt cutter is required to remove the seal.

These SnapTracker™ Bolt Seals feature a large "billboard" on bolt and locking body for larger, more legible numbers and left-to-right reading. Available in blue, green, red, and yellow.

Stock seals are pre-printed with "J. J. Keller" and a 7-digit number on the pin and barrel.

Requires 5,400 pounds of pull-apart strength to disengage.

Can be used for:

Railcars
Container Door Latches
Trailer Doors
Shipping Containers

NOTE: Stock seals must be purchased in increments of 50.

Pricing and Ordering

Product	50-99	100-199	200-499	500-999	1,000-2,999	3,000-4,999
Blue 284-R-B	$ 2.25 each	$ 2.04 each	$ 2.00 each	$ 1.95 each	$ 1.68 each	$ 1.46 each
Green 284-R-G	$ 2.25 each	$ 2.04 each	$ 2.00 each	$ 1.95 each	$ 1.68 each	$ 1.46 each
Red 284-R-R	$ 2.25 each	$ 2.04 each	$ 2.00 each	$ 1.95 each	$ 1.68 each	$ 1.46 each
Yellow 284-R-Y	$ 2.25 each	$ 2.04 each	$ 2.00 each	$ 1.95 each	$ 1.68 each	$ 1.46 each